Barco SLite, Руководство по обслуживанию

Страница: 34 / 53

7. SLite servicing procedures
C
AUTION
:
Always replace the old sealing ring of the re-sync unit with a new one for each time the re-sync
unit is removed. This to ensure a good sealing between the SLite tile and the re-sync unit. To forsake this
instruction will result in internal damage of the SLite tile.
Necessary tools
Nut driver 10 mm
Necessary parts
New sealing ring (Art. No.: R724571).
How to install the re-sync unit of an SLite tile ?
1. Place a new sealing ring on the re-sync unit.
2. Reconnect the internal power and data cable with the re-sync unit.
C
A
B
Image 7-3
A New sealing ring
B Internal power cable
C Internal data cable
3. Gently place the re-sync unit into position.
4. Fasten the re-sync with four bolts.
7.3 Remove the back cover of an SLite tile
C
AUTION
:
Ensure to perform this procedure in a dry and clean environment with a low humidity level. A high
humidity level inside a sealed tile will damage the internal fans and other electronic parts. Place, if necessary,
some small bags with a liquid absorbing substance (silica gel) inside the tile to absorb the remaining humidity.
Necessary tools
Nut driver 13 mm
How to remove the back cover of an SLite tile ?
1. Unplug the external power and data cables connected with the re-sync unit.
2. Remove the 14 nuts of the back cover, using a 13 mm nut driver.
30 R5976621 SLITE DISPLAY 02/09/2005