Barco SLite 10, Руководство по установке

Страница: 37 / 57

6. Maintenance
6.2 Software update
Software for SLite tiles
Software is stored on four different locations in the SLite tile:
1.
On the FPGA of the re-sync unit : firmware re-sync unit (A).
2. On the FPGA of the controller unit : firmware front (B).
3. On the second FPGA on the controller unit : firmware back (C).
4. On the CPU of the controller unit : program and boot software (µP).
LED drivers LED boards
LED controller unit Re-sync unit
FPGA
C
(firmware back)
FPGA
B
(firmware front)
CPU
µP
(program)
Serial comm.
FPGA
A
(firmware resyncer)
Data path
Image 6-3
Flash software like firmware re-sync unit, firmware front, firmware back and program code can be updated in the field if required.
CPU boot software can not be upgraded (only factory programmable). New releases of flash software are available on the “Partner
Zone” of the Barco web site
www.barco.com . Refer to the user guide of the Director toolset for instructions on reading out the version
of flash software and for uploading new versions.
R5976575 FIXED SLITE DISPLAY 08/03/2006 33