Barco R9843030, Руководство по установке

Страница: 11 / 23

3. DVI input (re)placement
3. DVI INPUT (RE)PLACEMENT
Overview
• Accessing the input section
• Replacing the DVI input
Upgrade/replacement
The following procedure illustrates the replacement of a DVI input board. The same operations must be done in case one wants to
add a second DVI input to the projector. Instead of removing (the defective) DVI board one has then to remove the board installed
on the desired layer.
Layer 5 is used for the DVI output and cannot be used to install an input board.
Layer 4 is free and can be used to install an extra input.
3.1 Accessing the input section
Overview
• Removing/installing the cable basket
• Removing the lens cover
• Removing the installed lens
• Removing the rear cover
• Removing the top cover
• Removing the filter front plate
• Removing the front plate
• Removing the Server
3.1.1 Removing/installing the cable basket
Necessary tools
No tools.
How to remove the cable basket ?
1. Press on the top of the cable basket so as to unlock the top part from the projector.
Image 3-1
2. Pull the cable basket so as to free it from the bottom locks.
R5976887 DVI INPUT KIT FOR ICON 29/03/2006 7