![background image](http://html1.mh-extra.com/html/barco/r9843030/r9843030_installation-manual_3831828011.webp)
3. DVI input (re)placement
3. DVI INPUT (RE)PLACEMENT
Overview
•
•
Upgrade/replacement
The following procedure illustrates the replacement of a DVI input board. The same operations must be done in case one wants to
add a second DVI input to the projector. Instead of removing (the defective) DVI board one has then to remove the board installed
on the desired layer.
Layer 5 is used for the DVI output and cannot be used to install an input board.
Layer 4 is free and can be used to install an extra input.
3.1
Accessing the input section
Overview
•
Removing/installing the cable basket
•
•
•
•
•
Removing the filter front plate
•
•
3.1.1
Removing/installing the cable basket
Necessary tools
No tools.
How to remove the cable basket ?
1. Press on the top of the cable basket so as to unlock the top part from the projector.
Image 3-1
2. Pull the cable basket so as to free it from the bottom locks.
R5976887 DVI INPUT KIT FOR ICON 29/03/2006
7
Содержание R9843030
