Barco R92112011, Руководство пользователя

Страница: 141 / 210

7. Advanced
7.8.10.2 Enabling DynaColor
Enabling DynaColor can be done by the operator.
What can be done ?
Enabling DynaColor changes the projector’s native color range to the color range as speci fi ed in the active DynaColor set. Disabling
DynaColor will keep the original colors determined by the source and the projector’s optical path.
How to enable Dynacolor?
1. Press MENU to activate the Tool bar
2. Press → to select the Display setup item
3. Press ↓ to Pull down the Display setup menu
4. Use ↑ or ↓ to select Dynacolor
5. Press → to open the menu
6. Use ↑ or ↓ to select Enable
7. Press → to open the menu
8. Use ↑ or ↓ to select ON
Image 7-159
9. Press ENTER
A white bullet indicates the active setting
7.8.10.3 Dynacolor adjustment
Overview
• Introduction
• Calibration (for multiple projectors)
• Common color values
• Factory preset
7.8.10.3.1 Introduction
In multiple channel setup, it might be needed to align the colors of every projector in order to match the colors
of the others in a prefect way. Only this case where multiple projector have to be color matched is covered in
the procedure below.
R59770066 SIM 7Q SERIES 08/12/2014 137