![background image](http://html1.mh-extra.com/html/barco/r9006332b1/r9006332b1_user-manual_4250685042.webp)
RLM W14 17/04/2017
34
5. Getting Started
5.3 Switching to standby
How to switch to standby
1. Press Power button on keypad or remote control for 3 seconds for projector to go into standby.
2. Wait until the projector completes the cooling process – at least 3~5 minutes.
3. Please do not press any key on the keypad or remote control before the projector goes into standby mode.
All custom settings are written to the internal backup device. A message ’Saving data ...’ indicates
this process. Never switch off the projector while this message is displayed.
When switching to standby, an after cooling process will start to cool down the projector. The after cool
time depends on the temperature inside the projector and can vary from 30 second to 5 minutes.
5.4 Power off projector
How to power off
1. Press Power button on keypad or remote control for 3 seconds for projector to go into standby.
2. Wait until the projector completes the cooling process – at least 3~5 minutes.
3. Switch off the projector with the power switch to ‘ 0”
C
AUTION
: Never switch off the projector while the message ’Saving data ... ’ is displayed !
5.5 Source selection
Press No. 1-5 on the remote control to activate the input source that define in control OSD Or press
on the keypad
to select the input source.
5.6 Changing OSD language
By factory default, the OSD menu of the projector is displayed in English. If you want to change default language. Press the
MENU
on Remote control or keypad, then go to Control -> Languages to select the language that you want.
Содержание R9006332B1
Страница 1: ...RLM W14 User manual...
Страница 92: ......