![background image](http://html1.mh-extra.com/html/barco/r9006332b1/r9006332b1_user-manual_4250685071.webp)
RLM W14 17/04/2017
63
11.Alignment
Black Level
The purpose of black level is in order to compensate the non overlap zones vs the over lap zone. It increase the black level
to the brightness level of the overlap black. It is to adjust the black level of the Top, Bottom, Left, Right direction on the
projected images.
It can be set to adjust the primary color of the projector. For instance, select ALL is to adjust the primary color of Red, Greed,
and Blue. Or it can be set to adjust the Red, Green and Blue independently.
The function combination of Black Level adjustment and 4 Corners is not available
The function combination of Black Level adjustment and blend along corners is not available.
Image 1
Image 2
A
B
C
D
White Level Lines
Image 1
Image 2
A
B
C
D
White Level Lines
for black level adjustment a black image needs to be
connected on the 2 projectors. Zone B will have the sum of the
blacks of the 2 projectors. Set the adjustment line of the black
level to the position where the non active DMD's of the right
projector ends. Set the adjustment line of the black level to
the position where the non active DMD's of the left projector
ends. Adjust black level of projector A to match the black level
with zone B. Adjust the projector C to match the black level
with zone B.
모서리를 따라
혼합
Reset
The function can reset the ScenergiX settings on the projector. It will restore to the images to the default that is without any
ScenergiX functions enabled.
Содержание R9006332B1
Страница 1: ...RLM W14 User manual...
Страница 92: ......