![background image](http://html1.mh-extra.com/html/barco/r9002411/r9002411_owners-manual_4234514008.webp)
Locations and Functions of Controls
R5976101.02 BARCO CINE5 310102 ___________________________________________________________________________
2-1
2
Rear Panel Terminology
1.
Communication port
(800 peripherals)
- allows communication between the RCVDS switcher and the projector.
- allows connection of a remote IR receiver unit to the projector.
2.
IR Remote -
Remote input for wired remote control
3.
IR sensor
- Receiver for control signals transmitted from the RCU.
4.
RGB-S IN or (R-Y)Y(B-Y)-S IN ( 4 x BNC connector )
:
RGB-S in
: allows a character generator, microcomputer, video camera, etc. having analog RGB output to be connected to
the projector.
Line inputs :
- signals RED-GREEN-BLUE
- COMPOSITE sync. signal
5.
VIDEO IN ( Composite video, 1 x BNC)
connector allows a video tape recorder, video camera, color receiver/monitor,
etc. having video line output to be connected to the projector.
6.
S-VIDEO IN
: Separated Y/C (luma-chroma) signal inputs and outputs for higher quality playback of Super VHS signals.
(4-pin S-VIDEO connector).
7.
Auto diagnosis display
Stand By / Operational
Pause
Sync
Hold Down EHT
IR
8.
Local key Pad
9.
Power (Mains) Switch
: Depending on the software set-up of the projector during installation, the projector switches to
'standby' or to 'operational mode'. If in standby, the standby led in the auto diagnosis display lights up.
10. Power (Mains) input
: Connect the supplied ac power (mains) cord here and to the wall outlet.
11. Audio Output :
Only if the Tuner option is installed. Audio out to be connected to audio amplifier.
12. RF input :
Only if the Tuner option is installed. Input for RF signals from a TV cable network or TV antenna.
13. RS 232 :
Allows connection to the serial port of a Computer for controlling the projector. The baud rate is fixed at 9600.
Front Panel Terminology
1.
IR SENSOR :
Receiver for control signals transmitted from the RCU.
LOCATION AND FUNCTION OF CONTROLS
1
1
2
3
4
5
6
8
9
10
7
11
12
13