Barco r9002357, Руководство пользователя

Страница: 29 / 50

Random Access Adjustment Mode
6-4 5976025A BARCOVISION 708 200499
Decoding
Only for NTSC signals.
The possibility is offered to decode the NTSC video signals via the normal American IRE standard
or via the European EBU standard.
To change the decoding setting, handle as follow :
1. Push the cursor key é or ê to select to select Decoding.
2. Press ENTER to toggle between IRE and EBU.
Select with or
<ENTER> to accept
<EXIT> to return.
Select with or
<ENTER> to accept
<EXIT> to return.
COLOR SELECT
RED
GREEN
BLUE
RED AND GREEN
BLUE AND GREEN
RED AND BLUE
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
COLOR SELECT
Select with or
<ENTER> to accept
<EXIT> to return.
PICTURE TUNING
COLOR BALANCE
SYNC : FAST
DECODING : EBU
CHROMA DELAY : ON
Port 2 : Video
LINE DOUBLER : ON
Chroma Delay
Only for PAL or SECAM video signals.
When a PAL video signal is connected to the projector, the chroma delay has to be set on PAL. When
a SECAM video signal is connected to the projector, the chroma delay has to be set on SECAM.
To change the Chroma Delay setting, handle as follow :
1. Push the cursor key é or ê to select to select Chroma Delay.
2. Press ENTER to toggle between PAL and SECAM.
Select with or
<ENTER> to accept
<EXIT> to return.
PICTURE TUNING
COLOR BALANCE
SYNC : FAST
DECODING : EBU
CHROMA DELAY : ON
PORT 2 : VIDEO
LINE DOUBLER : ON
Line Doubler
This menu item is only available when the projector is equipped with a line doubler.
Line doubling is only possible for Video, S-Video, Component Video images on standard line
frequency and RGB signals on 15 kHz.
To eliminate the video line patterns and to improve the image stability, the line doubler has to be
switched on. The line doubler is default set in the ON position when starting up for the first
time. The setting of the line doubler will be saved together with the source number. Each time
this source number is selected, the last saved version will be loaded.
To toggle the line doubler setting :
1. Push the cursor key é or ê to select Line Doubler.
2. Press ENTER to toggle between ON and OFF.
Select with or
<ENTER> to accept
<EXIT> to return.
PICTURE TUNING
COLOR BALANCE
SYNC : FAST
DECODING : EBU
CHROMA DELAY : ON
LINE DOUBLER : ON
Color Select
To select Color Select :
1. Push the cursor key é or ê to select Color Select.
2. Press ENTER to display the color select menu.
Use the cursor keys to highlight a color (CRT) or combination of colors
to display the projected image in that specific color.
To select a new color :
1. Press ENTER , the color selection menu appears again on the
screen.
2. Press EXIT, to terminate the color select procedure.
Port 2 : Video or S-Video
Port 2 can be used as a Video or S-Video input.
To change the Port 2 setting, handle as follow :
1. Push the cursor key é or ê to select Port 2.
2. Press ENTER to toggle between Video and S-Video.
Select with or
<ENTER> to accept
<EXIT> to return.
PICTURE TUNING
COLOR BALANCE
SYNC : FAST
DECODING : EBU
CHROMA DELAY : ON
Port 2 : Video
LINE DOUBLER : ON