![background image](http://html1.mh-extra.com/html/barco/r9002110/r9002110_owners-manual_3903448020.webp)
Controlling
4-4
5975188 RETRODATA 808s 210397
Color Saturation Control
Color saturation is only active for Video and S-Video Inputs. This
control adjusts the color intensity of the picture. Adjust the color
saturation using the + and - buttons (RCU). A bar scale gives a visual
indication on the screen of the current color setting while pressing on
the above indicated keys. If the bar scale is not visible on the screen,
press '
TEXT' key once and retry the above indicated keys. The bar
scale increases when pressing on the + button (richer colors) and
decreases when pressing the - button (lighter colors).
Tint Control
Tint is only active for Video and S-Video Inputs. The Tint Control is
effective only when using the NTSC 4.43 or NTSC 3.58 system. A bar
scale gives a visual indication on the screen of the current tint setting
while pressing the + or - buttons (RCU). If the bar scale is not visible
on the screen, press the '
TEXT' key once and retry the above
indicated buttons.
The bar scale increases when pressing on the + button (greener flesh
tones) and decreases when pressing the - button (redder flesh
tones).
Sharpness Control.
Sharpness control is only active for Video and S-Video Inputs. A bar
scale gives a visual indication on the screen of the current sharpness
setting while pressing the + or - buttons (RCU). If the bar scale is not
visible on the screen, press '
TEXT' key once and retry the above
indicated keys.
The bar scale increases when pressing on the + button (sharper
picture) and decreases when pressing on the - button (softer picture).
Controlling chained projectors.
Projectors can be controlled individually as well as in a group.
For individual control see previous pages.
For group control of the projectors.
(Input selection and analog picture control)
Program the 'zero address' into any RCU. Therefore, press on the
address key and key in the address ("0") with the numeric keys on the
RCU itself.
Once address '0' is pressed, all projectors will be controlled together
until a new address is entered on the RCU. It is possible to have a
common input selection and a common analog picture control.
Once a new address is entered, only the projector with that specific
address will follow the new instructions.
Note : For group control, all projectors in a control group must be
capable of receiving the IR signal from the controlling RCU at the
same time.