Barco PH series, Руководство пользователя и инструкция по установке

Страница: 48 / 143

5. Advanced menu
5.4 Installation 1 menu
Overview
IMAGE INSTALL1 INSTALL2
MULTI-
SCREEN FEATURE SIGNAL NETWORK
INFO
LAMP MODE
LAMP SELECT
STANDARD
1H/24H
LOW
OFF
STANDARD
DUAL
LAMP RELAY
HIGH ALTITUDE MODE
STANDBY MODE
IMAGE REVERSE
LENS LOCK
ENTER
GEOMETRY
ENTER
TEST PATTERN
ENTER
SPLIT
ENTER
AUTO POSITION
ENTER
IMAGE INSTALL1 INSTALL2
MULTI-
SCREEN FEATURE SIGNAL NETWORK
INFO
LENS LOCK
LENS SHIFT LOCK
ZOOM/FOCUS LOCK
LENS SHIFT RESET
OFF
OFF
OK
Image 5-14
Item
Setting
Function
LAMP MODE STANDARD Select to optimize the settings automatically depending on the input
signal. (Select this option for normal use.)
LOW Select to moderate the intensity of the lamp. The operating sound is
reduced and the lamp lifetime becomes longer.
LAMP SELECT
DUAL
LAMP 1 and LAMP 2 illuminate.
SINGLE
The lamp with shorter operation time is automatically selected at
power
‑
on.
LAMP 1
LAMP 1 illuminates. (When it is broken or dead, LAMP 2 illuminates
automatically.)
LAMP 2
LAMP 2 illuminates. (When it is broken or dead, LAMP 1 illuminates
automatically.)
LAMP RELAY DUAL: OFF The LAMP RELAY doesn’t work.
DUAL: 1H/24H / 2H/1W Use to set the lamp relay interval.
SINGLE: OFF The LAMP RELAY doesn’t work.
SINGLE: 24H / 1 WEEK Use to set the lamp relay interval.
STANDBY MODE STANDARD Select this option when you control the projector via the LAN,
REMOTE 1 IN, and SERIAL OUT terminal during power standby.
LOW Select this option when you don’t control the projector via the LAN,
REMOTE 1 IN, and SERIAL OUT terminal during power standby. This
option disables the LAN, REMOTE 1 IN, and SERIAL OUT terminal
and reduces the power consumption during the power standby.
IMAGE REVERSE OFF Select when viewing images from the front with the projector installed
on the
fl oor.
MIRROR Select when viewing images projected from the behind of the screen
with the projector installed on the
fl oor.
INVERT Select when viewing images projected from the behind of the screen
with the projector installed on the ceiling.
MIRROR INVERT Select when viewing images from the front with the projector installed
on the ceiling.
HIGH ALTITUDE MODE STANDARD This projector does not support this function.
LENS LOCK
ENTER
The LENS LOCK menu is displayed for the following settings.
ZOOM/FOCUS LOCK ON / OFF Use to enable or cancel the FOCUS LOCK and ZOOM LOCK.
LENS SHIFT LOCK ON / OFF Use to enable or cancel the LENS SHIFT LOCK.
LENS SHIFT RESET
OK
Use to reset the position of the lens to the factory setting.
44 R5905597 PHXX SERIES 20/05/2014
Downloaded From projector-manual.com Barco Manuals