![background image](http://html1.mh-extra.com/html/barco/overview-d-50/overview-d-50_installation-manual_4197749082.webp)
8. Final Adjustment and Configuration
OverView D 50" – DOC-3303-5 – installation manual – Revision 10 – September 2006
September 2006
September 2006
September 2006 ________________________________
________________________________
________________________________
________________________________________________________
________________________
________________________
________________________8-14
Selecting
Service | Color/Brightness | Color Coordinate Adjustment
displays the following dialog box:
Figure 8-18
dialog box Color Coordinate Adjustment
The dialog box refers to the active lamp!
The data need to be set individually for each lamp!
The Enable/Disable selection always refers to both lamps!
Click on the arrow next to the respective text field to get a list of the available options:
Parameter
Possible value
Parameter 1
Measured
Desired
Parameter 2
X coordinate (should be within the measured triangle of the factory colors)
Y coordinate (should be within the measured triangle of the factory colors)
Luminance (if Parameter 1 == Measured), otherwise grayed out
The relative luminance of a color is defined as the ratio of the luminance of this color to the
luminance of white
(which – per definition – equals 1).
Gain (if Parameter 1 == Desired), otherwise grayed out.
Gain should be set to
1
to prevent clipping!
Colour
Red
Green
Blue
Cyan
Yellow
Magenta
White
Value
Value of coordinate in the x, y chromaticity diagram, CIE 1931
Содержание OVERVIEW D 50"
Страница 1: ...Installation manual OVERVIEW D 50...