Barco OVERVIEW D 50", Руководство по установке

Страница: 54 / 120

6. Installation of Projection System
OverView D 50" – DOC-3303-5 – installation manual – Revision 10 – September 2006 September 2006 September 2006 September 2006 ________________________________
________________________________ ________________________________ ________________________________________________________ ________________________ ________________________ ________________________6-12
6.5 Inserting the Lamp Modules (Illumination unit with lamps of 100W/120W)
•
Fetch the lamp module on its housing. The power socket is on the right side.
•
Insert the lamp carefully. Take care that the "tubes" slide on the guide rods [2].
Figure 6-12
lamp and lamp housing
•
Mind the position of the fingers: the force is to apply on the outer part of the module
Figure 6-13
applying the force on the lamp module
•
Press the lamp module tightly into its socket
•
Apply the securing ring on the lamp and press it in axial direction while turning
Figure 6-14
inserting the securing ring
•
Turn the securing ring until its hooks click round the guide rods.
Figure 6-15
inserting the securing ring