Barco OVERVIEW D 50", Руководство по установке

Страница: 33 / 120

3. Installation of Screen Module
OverView D 50" – DOC-3303-5 – installation manual – Revision 10 – September 2006 September 2006 September 2006 September 2006 ________________________________
________________________________ ________________________________ _________________________________________________________ _________________________ _________________________ _________________________3-9
bottom row
adjusted to one level
Step9
When all screens of the bottom row are
installed, level the screens!
Loosen the 4 locking screws to move the
screen slightly in vertical direction.
Adjust the vertical position of the screens that
the upper border of the front elements make a
straight line.
Step10
Install the screens of the second row:
Start with the screen on top of the static
screen.
Lock it in hor izontal dir ection by applying 2x1
screw diagonally.
Take car e that all 4 ver tical movement plates
are in their nominal position, i.e. the drillings of
the plate flush with the threads of the frame.
Mount the screen that its position is symmetric
and that it is touching the screen below.
Completely remove the horizontal movement
screws.
Step11
Install the other screens of the second row.
These screens must not be locked in any
direction! Therefore no screws have to be
applied!
Screw in the horizontal movement screws until
the screen front is moved approx. 1mm against
the vertical frame towards the horizontal
movement screw.
Since these screen feature full movability, no
screws have to be applied and fixed.
When the screens are mounted and the gap to
the adjacent screen closed by turning the
horizontaol movement screws, completely
remove these screws!