Barco OV-808, Руководство по установке

Страница: 66 / 84

Installation
Barco - OV-808, OV-815– R599874 – installation manual – revision 01– November 2007 ___________________________________________________________ 61
Step 83
Care for a close connection between illumination unit
and projection unit!
When the illumination unit and the projection unit of
all projection modules of a display wall are installed,
proceed with the cabling.
5.22 Finalizing the cabling
Step 84
Power:
Plug in the power cord to the IEC320 interface of the
illumination unit [1].
In case the display module is equipped with a Multi
Input Module:
Plug in the power cord to the IEC320 interface of the
Multi Input Module.
Use the cable included in the Multi Input Module to
connect the IEC320 interface [1] of the illumination
unit to the AC out interface of the Multi Input Module.
I2C Communication:
Plug the interconnection cable into the I2C interface
[2] of the illumination unit and of the projection unit
[I2C].
Digital sources are connected to DVI 1 IN and/or
DVI 2 IN. DVI 1 IN is loop-through to DVI 1 OUT,
DVI 2 IN is loop-through to DVI 2 OUT.
In case a source has to be displayed on additional
projection modules, connect the respective DVI
output with one of the DVI inputs of the other
projection module