![background image](http://html2.mh-extra.com/html/barco/nio-systems/nio-systems_user-manual_4119155012.webp)
12
Nio
Display installation
Unlocking the height mechanism
In the factory, the height-positioning system in the display foot is
blocked with a red clip to prevent damage during transportation.
Before installing the display, you must remove this clip.
Figure 5: Location of the clip
T
O
REMOVE
THE
CLIP
:
1
Position the display with its rear side facing you.
2
Pull the red clip out of the fixation holes in the foot.
3
Keep the clip in case the display needs to be shipped later.
Prior to installing your B
ARCO
N
IO
Display and connecting all
necessary cables, make sure to have a suitable display controller
physically installed in your computer. If you are using a Barco
display controller, please consult the dedicated user guide
available on the system CD.
Clip
Содержание Nio systems
