Barco MVGD 1319, Инструкция по установке и эксплуатации

Страница: 38 / 64

Operation
38
Advanced functions in the Adjustments menu
Low Pass Filter
This function is not available for digital video signals.
The display electronics provide 4 different low-pass filter settings to
filter possible high-frequent distortion from an
analog
video signal.
Select a different filter setting in case the image contains high-frequent
noise or distortion. Select the filter setting that gives the best result.
Readjustment of sample phase is necessary after selection of a
different filter.
Geometry: Active Input Region
When a video signal is connected, the display looks for a matching
format in its VESA table. The VESA table contains the starting position
(first line of the frames and first pixel of the lines) of the active video
and the length of the active video (number of lines per frame and
number of pixels per line).
When there is no match with one of the formats in the table, the
nearest format is chosen, possibly resulting in a not-perfectly aligned
image. The user can align the image using the Automatic Geometry
function.
However, in some cases the user is not satisfied with the image after
Automatic Geometry, or the video signal itself does not meet the
requirements for a successful Automatic Geometry. In that case the user
can manually define the active video region to display, creating offsets
to the settings chosen by the display.
In order to use these adjustments successfully, the scaling setting is
preferably be set to
None
.
The following offset adjustments are available: