Barco MVGD 1319, Инструкция по установке и эксплуатации

Страница: 59 / 64

Warranty Statement
59
(3): ‘Guaranteed Backlight Lifetime’ is the number of backlight hours during which a predefined
luminance value, ie. the Factory Calibrated Luminance, will be provided by a specific diagnostic
display model. This figure is printed on the Warranty certificate of each display or can be
requested at your local Barco office.
(4): ‘Factory Calibrated Luminance’: is the typical luminance value that a specific diagnostic
display model is calibrated at during the production process. This figure is printed on the
Warranty certificate of each display or can be requested at your local Barco office.
c. Lamps, optical components in projectors
d. Replacement because of:
i. image retention as a result of:
- not correctly using screen saver and/or Display Power Management System (DPMS) as
explained in the user manual
- prolonged operation of the display with a static image on the same screen area
ii. a number of missing pixels that is lower than the total allowable number as mentioned in
the product specifications.
iii. difference in color temperature that is lower than the total allowable difference as
mentioned in the product specifications
iv. difference in color temperature as a result of not using all displays of a multi-head
configuration at the same rate.
v. LCD luminance uniformity that is in within the product specifications or luminance
uniformity performance that is inherent to LCD technology.
Barco nv, MID does not warrant a minimum life time nor a performance of any of the consumables.
2.6
Replacement of moveable parts such as power cords, remote controls, …
2.7
Any product disassembly and installation costs at the operation site, travel expenses and travel time to
and from the operation site for the personnel in charge of the repair works and transport charges.
2.8
Any failures resulting from an accident, negligence (such as but not limited to removing or deleting
system files & licensed software product files), misuse, circuit failure or any change, damage due to
fire, water, thunder or lightning, power failure or fluctuation, disruption of communication lines or due
to force majeure, or any reason foreign to the equipment.
2.9
Any specific services or procedures, asked for by Customer, related to verification of repaired
equipment.
2.10 The evaluation cost in case of a returned product deemed functional is not covered under warranty
and will be charged to the Customer, at Barco’s sole discretion, based on a case-by-case evaluation.
ARTICLE 3: OBLIGATIONS OF THE CUSTOMER
Customer hereby assumes the following obligations as partial consideration for Barco nv, MID
performance of its requirements under the warranty condition; failure by Customer to meet its
obligations under this paragraph shall excuse Barco nv, MID’s performance hereunder: