![background image](http://html1.mh-extra.com/html/barco/mfgd-1318/mfgd-1318_user-manual_473564016.webp)
User manual MFGD 1318
18
2 Click the control wheel. The Autoset menu appears.
AUTOSET
Full Autoset
Automatic Geometry
Automatic Phase
Automatic Gain
EXIT
3 Turn the control wheel to select the function you wish to execute.
4 Execute the function as described below.
The Autoset menu contains the following items:
Full Autoset .................Click the control wheel to perform all Autoset
functions (below) one after another.
Automatic Geometry ...Click the control wheel to adjust the image
geometry automatically. This function mea-
sures the start and the end of the incoming
video signal. It displays the complete active
video in the center of the screen and, if the
active video is smaller than the native panel
resolution and no scaling is selected (see
further), it puts black borders around the active
video window.
Automatic Phase .........Click the control wheel to adjust the video
sampling phase and frequency automatically
Automatic Gain ...........Click the control wheel to adjust the video
levels (black and white) automatically
3.4.
Controlling Video Contrast* and Video
Brightness*
* Not in DVI mode
To enter the menu:
1 In the main menu, turn the control wheel to select the Video
Contrast or Video Brightness menu.
2 Click the control wheel to enter the Video Contrast or Video
Brightness menu. You can change the current setting manually or
select the calibrated position.