![background image](http://html1.mh-extra.com/html/barco/mfgd-1318/mfgd-1318_user-manual_473564015.webp)
User manual MFGD 1318
17
3.3. Using the Autoset* functions
* Not in DVI mode
The Autoset menu provides a set of functions to adjust the display
automatically.
When do you need to use the Autoset functions?
It is necessary to perform the Auto Gain and Auto Phase calibrations
in the following cases:
The first time you use the display on an analog video
After connecting or selecting another analog video source
It is necessary to perform the Automatic Geometry function in case
you notice the image geometry or positioning is not as desired.
Required test pattern
To obtain good results with the autoset functions, it is necessary to
have a good image on which to perform the functions.
For Auto Geometry, the pattern should be an image that is filled up to
the edges, from left to right and top to bottom. The edges of the image
should have an intensity of at least 15% video amplitude. E.g., a
Windows desktop pattern would be a good image.
For Auto Phase, the pattern should contain sharp black-white transi-
tions, like a line pattern or characters.
For Auto Gain, the pattern should contain parts that are completely
black (0% video amplitude) and parts that are full white (100% video
amplitude).
To enter the Autoset menu:
1 In the main menu, turn the control wheel to select the Autoset
menu.
MFGD 1318
MAIN MENU
Autoset*
Video Contrast*
Video Brightness*
Luminance
Adjustments
Input Selection Auto
Settings
Preset
Information
EXIT
* Not in DVI mode