Barco MDSC-8232 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 64

background image

K5902094 (451920611693) /02

MDSC-8232

18

4.

Use any USB peripheral (keyboard, mouse, webcam, ...) by connecting it to the available USB interfaces.

5.

Connect a headphone to the appropriate output to listen to audio sent over Nexxis.

6.

Connect a microphone to the appropriate input to send spoken audio over Nexxis.

7.

Connect a (set of) speaker(s) to the line out interface to listen to audio sent over Nexxis.

8.

Connect any kind audio player to the line in interface to send audio over Nexxis.

9.

Connect the display with Nexxis to use the remote control protocol or to update the display firmware.

2

1

3

4

MP3

1

4

5

6

7

8

9

Image 3-3

3.3 Power supply connection

To connect the power supply

1.

Connect the supplied external DC power supply unit to the +24 VDC power input of your display.

2.

Plug the other end of the external DC power supply into a

grounded

power outlet by means of the proper

power cord delivered in the packaging.

Image 3-4

CAUTION:

To avoid risk of electric shock, the external DC power supply must be connected to a

mains with protective earth. The ground connection on the display

’

s DC power input connector has

no protective earth function. The MDSC-8232 display protective earth connection is provided via a
dedicate pin (see next steps).

Protective earth

Earth the MDSC-8232 by connecting the protective earth pin to a grounded outlet by means of a yellow/green
AWG18 wire (maximum admitted cable length according to national regulation requirements).

Display installation

«
...
16
17
18
19
20
...
»

Содержание MDSC-8232

































































Отзывы:

Нет отзывов

Похожие инструкции для MDSC-8232

400DX-2 - 40IN LCD 1920X1080 3000:1 VGA Dvi

Бренд: Samsung Страницы: 28

400DX-2 - 40IN LCD 1920X1080 3000:1 VGA Dvi

Бренд: Samsung Страницы: 29

Бренд: Daktronics Страницы: 29

Бренд: Planar Страницы: 24

Бренд: Omron Страницы: 132

Бренд: Hansol Страницы: 8

Бренд: Oricom Страницы: 24

Бренд: Harding Страницы: 9

Бренд: Viotek Страницы: 16

Бренд: Hanns.G Страницы: 24

Бренд: MSI Страницы: 31

Бренд: Eizo Страницы: 76

Бренд: Fema Страницы: 36

Бренд: EverFocus Страницы: 28

Бренд: Marshall Electronics Страницы: 22

Бренд: Acer Страницы: 47

Бренд: Acer Страницы: 27

Бренд: Samsung Страницы: 115

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды