Barco MDSC-2326 MNAH, Руководство пользователя

Страница: 55 / 78

K5902135 (451920612565) /04 MDSC-2326
55
5.5.5 Keyboard backlight
About the keyboard backlight
By default, after lighting up, the keyboard backlight will dim again if no further actions are taken within the
following 5 seconds. However, this behavior can be changed so that the keyboard backlight is always on.
To adjust the keyboard backlight
1. Bring up the OSD main menu.
2. Navigate to the System menu.
3. Enter the Keyboard Backlight submenu.
4. Select one of the available options and confirm.
5.5.6 Power Saving
About power saving
When the active input(s) is (are) missing, this setting allows the display to switch off the backlight and enter a
low power mode. In this status the availability of the selected input is checked periodically.
The unit can exit from power save mode in two cases:
1. When a signal is applied on the selected input (or any input in case of auto).
2. By activating the OSD menu, see “ OSD menu activation ” , page 33.
To enable/disable power saving
1. Bring up the OSD main menu.
2. Navigate to the System menu.
3. Enter the Power Saving submenu.
4. Enable/Disable power saving as desired and confirm.
Advanced operation