Barco MDSC-2326 MNAH, Руководство пользователя

Страница: 44 / 78

K5902135 (451920612565) /04 MDSC-2326
44
To select a gamma preset
1. Bring up the OSD main menu.
2. Navigate to the Picture menu.
3. Enter the Gamma submenu.
4. Select one of the available gamma presets and confirm.
5.1.7 Sharpness
To adjust the sharpness level
1. Bring up the OSD main menu.
2. Navigate to the Picture menu.
3. Enter the Sharpness submenu.
The command bar Sharpness is highlighted.
4. Set the sharpness level as desired and confirm.
5.2 Picture advanced menu
5.2.1 Black Level
About black level
This command allows to add or subtract an offset to the input video signal (available only on video formats).
To adjust the black level
1. Bring up the OSD main menu.
2. Navigate to the Picture advanced menu.
3. Enter the Black Level submenu.
The command bar Black Level is highlighted.
4. Set the black level as desired and confirm.
5.2.2 Input range
About input range
This command sets the RGB signal range. Suggest to set the input range according to the input signal range.
The available input ranges are:
• 0 – 255
• 16 – 235
• 16 – 255
To select the input range
1. Bring up the OSD main menu.
2. Navigate to the Picture advanced menu.
3. Enter the Input range submenu.
4. Select one of the available input ranges and confirm.
5.2.3 Smart Video
About Smart Video
This function allows to reduce the video latency in the monitor if its frame rate is in the range of 50 - 60 Hz. To
achieve a minimum latency select one of the surgical modes.
The available Smart Video presets for your display are:
• Diagnostic (best picture quality)
• Surgical (low latency)
Advanced operation