Barco MDSC-2326 MNAH, Руководство пользователя

Страница: 33 / 78

K5902135 (451920612565) /04 MDSC-2326
33
2. While your display is off, press and hold the stand-by key for approximately 3 seconds (or until the
keyboard backlight stops blinking).
To minimize the power consumption, also the external power supply has to be switched off.
To switch off your display:
1. While your display is switched on, unlock the keyboard see “ Keyboard activation/deactivation ” , page 32.
2. Press and hold the stand-by key for approximately 3 seconds (or until the keyboard backlight stops
blinking and switches off).
While pressing the stand-by key to switch off the display, the front key illumination will blink.
4.4 Power led status
About the the power led status
The behavior of the power led shows the status of the unit:
• No led visible: the status of the unit is hard OFF (the switch of the power supply is OFF)
• Led is fading between on and off: the status of the unit is soft OFF (when pushing the standby button, the
unit is on or off)
• Led is full orange: the unit is in power save mode (no signal & power save mode enabled)
• Led is blinking green/orange: the unit is in searching mode (looking for a signal)
• Led is full green: the unit has an image on the screen.
4.5 OSD menu activation
To activate the OSD menu
1. If not already done so, switch on the display by pressing and holding the stand-by key for approximately 3
seconds.
2. Switch on the front key illumination by activating the keyboard (see “ Keyboard activation/deactivation ” ,
page 32).
3. Touch the Menu/Enter key .
As a result, the OSD main menu comes up in the bottom right corner of the screen. If no further actions are
taken within the following 30 seconds, the OSD menu will disappear again.
The time-out of the OSD menu automatic close function can be adjusted or disabled in the OSD
menu (
OSD Time-out ).
The OSD menu position can be adjusted in the OSD menu ( OSD Hor. Pos. and OSD Vert. Pos. ).
4.6 OSD menu navigation
OSD menu structure explained
Below is an example of the OSD menu structure:
Daily operation