Barco MDSC-2324 DDI, Руководство пользователя

Страница: 33 / 78

K5903252 (451920612633) /02 MDSC-2324
33
4.3 On/Off switching
To switch on your display:
1. Activate the power supply through the switch located on the external power supply.
2. While your display is off, press and hold the stand-by key for approximately 3 seconds (or until the keyboard
backlight stops blinking).
To minimize the power consumption, also the external power supply has to be switched off.
To switch off your display:
1. While your display is switched on, unlock the keyboard see “ OSD menu activation ” , page 33.
2. Press and hold the stand-by key for approximately 3 seconds (or until the keyboard backlight stops blinking
and switches off).
While pressing the stand-by key to switch off the display, the front key illumination will blink.
4.4 Power led status
About the the power led status
The behavior of the power led shows the status of the unit:
• No led visible: the status of the unit is hard OFF (the switch of the power supply is OFF)
• Led is fading between on and off: the status of the unit is soft OFF (when pushing the standby button, the
unit is on or off)
• Led is full orange: the unit is in power save mode (no signal & power save mode enabled)
• Led is blinking green/orange: the unit is in searching mode (looking for a signal)
• Led is full green: the unit has an image on the screen.
4.5 OSD menu activation
To activate the OSD menu
1. If not already done so, switch on the display by pressing and holding the stand-by key for approximately 3
seconds.
2. Switch on the front key illumination by activating the keyboard (see “ Keyboard activation/deactivation ” , page
32).
3. Touch the Menu/Enter key .
As a result, the OSD main menu comes up in the bottom right corner of the screen. If no further actions are
taken within the following 30 seconds, the OSD menu will disappear again.
The time-out of the OSD menu automatic close function can be adjusted or disabled in the OSD
menu (
OSD Time-out ).
The OSD menu position can be adjusted in the OSD menu ( OSD Hor. Pos. and OSD Vert. Pos. ).
Daily operation