Barco MDSC-2232 Series, Руководство пользователя

Страница: 25 / 76

K5902105 (451920611795) /04 MDSC-2232
25
3.3 Nexxis OR
Overview
Connecting your MDSC-2232 to Barco's Nexxis OR system allows you to distribute video, graphics, audio and
computer data over the IP network, in raw uncompressed format, inside the operating room and even between
surgical suites.
To connect your MDSC-2232 to Barco's Nexxis OR system, connect the 10Gb Ethernet interface to your
Nexxis switch. More info about Nexxis OR and how to configure the MDSC-2232 in your network is available
in the dedicated user guides. Please visit
www.barco.com to obtain these user guides.
Nexxis OR is only available on the MDSC-2232 MNA version.
3.4 Power supply connection
To connect the power supply
1. Connect the supplied external DC power supply unit to the +24 VDC power input of your MDSC-2232 display.
2. Plug the other end of the external DC power supply into a grounded power outlet by means of the proper
power cord delivered in the packaging.
Warning: To avoid risk of electric shock, the external DC power supply must be connected to a mains
with protective earth. The ground connection on the display ’ s DC power input connector has no
protective earth function. The MDSC-2232 display protective earth connection is provided via a
dedicate pin (see next steps).
Image 3-6
Potential equalization
When potential equalization between the display and other devices is required then connect the potential
equalization pin (POAG) to the potential equalization terminal of the equipment.
Image 3-7
Protective earth
Earth the MDSC-2232 by connecting the protective earth pin to a grounded outlet by means of an AWG18
wire (maximum admitted cable length according to national regulation requirements).
Display installation