Barco MDSC-2232 Series, Руководство пользователя

Страница: 42 / 76

K5902105 (451920611795) /04 MDSC-2232
42
To select a gamma preset
1. Bring up the OSD main menu.
2. Navigate to the Picture menu.
3. Enter the Gamma submenu.
4. Select one of the available gamma presets and confirm.
5.1.7 Sharpness
To adjust the sharpness level
1. Bring up the OSD main menu.
2. Navigate to the Picture menu.
3. Enter the Sharpness submenu.
The command bar Sharpness is highlighted.
4. Set the sharpness level as desired and confirm.
5.2 Picture Advanced menu
5.2.1 Black Level
About black level
This command allows to add or subtract an offset to the input video signal (available only on video formats).
To adjust the black level
1. Bring up the OSD main menu.
2. Navigate to the Picture advanced menu.
3. Enter the Black Level submenu.
The command bar Black Level is highlighted.
4. Set the black level as desired and confirm.
5.2.2 Smart Video
About Smart Video
This function allows to reduce the video latency in the monitor if its frame rate is in the range of 50 - 60 Hz. To
achieve a minimum latency select one of the surgical modes.
The available Smart Video presets for your display are:
• Diagnostic (best picture quality)
• Surgical (low latency)
• Surgical 1 (low latency, optimized for fast moving images)
About latency
The video latency is defined as the delay between the monitor input video level transition time to the
corresponding light output transition on the screen top-left corner.
The maximum latency in Surgical mode is less than 1 Video Frame period for all the monitor electrical inputs
while in Diagnostic mode the latency is between 1 to 2 Video Frame periods excluding S-Video, CVBS analog
and SFP optical (MNA versions) inputs which have an additional delay of maximum 1 Video Frame period.
To select a Smart Video preset
1. Bring up the OSD main menu.
2. Navigate to the Picture advanced menu.
Advanced operation