4
Getting Started
POWER CONNECTION
Safety Precautions (Cont’d)
The power supply voltage rating of this product is
AC110 V to 120 V, AC200 V to 240 V, the power
cord attached conforms to the following power
supply voltage. Use only the power cord designated
by our dealer to ensure Safety and EMC.
When it is used by other power supply voltage,
power cable must be changed.
Ensure that the power cable used for the projector is
the correct type for the AC outlet in your country.
Consult your product dealer.
Power cord
For European continent countries:
AC200 V to 240 V
(3.3 m)
Power cord
Power supply voltage:
AC110 V to 120 V
(3.3 m)
WARNING:
Do not cut off the main plug from this
equipment.
If the plug fitted is not suitable for the power points in
your home or the cable is too short to reach a power
point, then obtain an appropriate safety approved
extension lead or adapter or consult your dealer.
If nonetheless the mains plug is cut off, dispose of
the plug immediately, to avoid a possible shock
hazard by inadvertent connection to the main
supply. If a new main plug has to be fitted, then
follow the instruction given below.
WARNING:
THIS APPARATUS MUST BE EARTHED.
IMPORTANT:
The wires in the mains lead on this product are
colored in accordance with the following cord:
Green-and-yellow : Earth
Blue
: Neutral
Brown
: Live
As these colors may not correspond with the colored
making identifying the terminals in your plug,
proceed as follows:
The wire which is colored green-and-yellow must be
connected to the terminal which is marked
M
with
the letter E or the safety earth or colored green or
green-and-yellow.
The wire which is colored blue must be connected to
the terminal which is marked with the letter N or
colored black.
The wire which is colored brown must be connected
to the terminal which is marked with the letter L or
colored red.
LX-5_EN.book Page 4 Friday, July 4, 2008 9:35 AM
