![background image](http://html1.mh-extra.com/html/barco/lx-5-series/lx-5-series_user-manual_3907921024.webp)
24
Network Settings
Set the IP address for this projector. There are 2 methods to set the IP address.
Assigning a static IP address
Assigning an IP address from the DHCP Server
Assigning a static IP address
The
of this projector is set to
(the DHCP client function is OFF) by default.
Upon turning on the power, this projector starts running with the following IP address.
IP Address
: 192.168.0.2
Subnet Mask
: 255.255.255.0
Default Gateway
: 192.168.0.254
IP address setting at the computer
Set the computer to an IP address that enables communication with this projector.
1
Click
and select
2
Double click
3
Right-click on
and select
●
Check to ensure that the
and
4
Select
5
Set the IP address
6
Click
Local Area Connection Properties
screen
IP Address Settings
A
B
C
D
E
Set the
(For example, use 192.168.0.100 when LX-5 is in its default
settings)
NOTE:
●
Make sure that you take note of the original IP address
before altering.
●
When setting, ensure that a duplicate IP address is not
used within the same network environment.
Set to a value that is appropriate for the setting operation.
Clarify with the network administrator if you have any queries.
(Use 255.255.255.0 when the camera is in its default settings)
Select
When a
is present, make use of the IP
address (e.g., 192.168.0.254)
LX-5_EN.book Page 24 Friday, July 4, 2008 9:35 AM