12 _____________________________________________________________ Barco – ISIS LFC – Installation Guide
With reference to
Figure 2-8 LFC Board installation and wiring
, install the PIB K5830011 in
the slot next tot the LFC Board, but wait fixing it until the following cabling is made.
Connect a cable K3494135 between J11 on the JANUS Board K5831010 and J15 on
the PIB K5830011 board. Connect a cable K3494135 between J9 on the JANUS Board
K5831010 and J16 on the PIB K5830011 board.
Figure 2-8 LFC Board installation and wiring
Fix the PIB K5830011 at the decorative cover plate side with a screw V3622126 and at
the other side with a screw B361085.
With reference to Figure 2-9 , connect the yellow power cable (Z3421999) with J1 on
the PIB (K5830011). Connect the cable K3494133 between J6 of the LFC Board
K5830190 with J9 on the PIB K5830011, guiding the cable through the hole in the LFC
board metal support plate.
With reference to Figure 2-10 Cable fixation, fix the cables Z3421999 and K3494133
with 3 wire ties V348000.
Install the AIB K5830040 next to the PIB K5830011 and fix it at the decorative cover
plate side with a screw V3622126 and at the other side with a screw B361085.
With reference to
Figure 2-4 MDP 471 Rear Cover removal
, reinstall the rear cover not
forgetting to reconnect the Fan module. Use the 11 screws named “A”.
Use 10 new screws K58110062 for screwing the fixations named “C”.
Fix the 4 backlight covers with the 8 captive screws named “B”.
If done by qualified personnel and according to this installation procedure, a
new warranty label can be attached.
