Barco IOSONO ONE Series, Инструкция по установке и эксплуатации

Страница: 30 / 35

6. Use Cases
2. Press Play to start the playback
Note: The name and the current position of the played clip are displayed in the head display
3. Press the Pause button to stop and resume the playback
4. Press the Back and Next buttons to select other clips for playback
5. Press the Eject button to clear the show window
6.5 Remote control from external media controllers
About
The Remote Control feature provides an interface, that enables third party programmable, external media controllers to control
the IOSONO ONE via command lines over TCP/IP, TCP/UDP and COM/RS232 connections. How to change the Remote Control
settings with the Play Con
fi g software is explained in "Network Tab", page 19.
Each command is terminated by a byte having the value 0x0D (which corresponds to ASCII’s CR signal).
Command message:
<Command>0x0D
Example:
PLAY0x0D
Command message with data:
<Command><Whitepsace><Data>0x0D
Example:
CUE Cliplist10x0D
You can fi nd a list of remote control commands In the following table:
Name Arguments Function
Comment
AUTOPLAY ON
AUTOPLAY OFF
If activated, the next cued clip
will follow the current playing
clip, the transition is seamless Playback will stop at clip end
and select the next clip when
deac- tivated, so play com-
mand will then start next clip
BACK
ning of current clip When stopped, back has no
effect
CHASE ON
CHASE OFF
Turns timecode
synchronization on or off Will stop playback, re- moves
LOOP
CUE
Name: (Case sensitive) Name
of a clip list Sets the clip list to be played
next, current played clip is pre-
served, everything after this
clip is removed and replaced
by the cued clip list, clip lists
consist of 1 or more clips Name of the clip list is case
sensitive
EJECT
Clears all cued clips Will stop the playback
GOTO
Position: A timecide position
string (e.g. 00:01:05:13) Jumps to the given timecode
po- sition within the clip list Will not be executed when
CHASE is ON
LOOPON
LOOPOFF
When on, the playback will
start with the
fi rst cued clip
after the last was fi nished
Will not be executed when
CHASE is ON
MUTEON
MUTEOFF
Mutes and unmutes the audio
output
PAUSE
Pauses playback, position is
pre- served Will not be executed when
CHASE is ON
PLAY
Starts playback when paused
or stopped, jumps to next clip
when playingnect If no next clip exists, nothing
happens
PRIOR
Sets playback position to
begin- ning of prior clip If the currently played clip is
the
fi rst in the list, nothing will
hap- pen
SETVOLUME
Sets main volume
STATUS
Returns the status byte
STOP
Stops playback, resets
position to
fi rst cued clip
26 R5906747 IOSONO ONE 16/05/2017