Barco IOSONO ONE Series, Инструкция по установке и эксплуатации

Страница: 23 / 35

5. Play Config Software
5.4.3 Network Tab
Network Tab
1
2
3
6
4
5
7
8
Image 5-7
Network tab in system setup of Play Con
fi g
Item No. Element Function
1 IP Address IP Address of the IOSONO ONE. Factory setting is 192.168.1.1
2 Net Mask Subnet Mask for the IP connection. Factory setting is 255.255.255.0
3 Gateway Network Gateway for the IP connection Factory setting is 0.0.0.0
4 DHCP Enables DHCP mode. Network settings will be adjusted automatically if a DHCP
server is present at the network. Factory setting is OFF
5 Remote Connection Type TCP/IP, UDP/IP and COM/RS232 possible
6 Remote Port Selection of the remote port for IP remote connections
7 Remote Terminate
Sequence CR, LF or CR/LF possible
8 Reboot Reboot the IOSONO ONE to resume network settings
Note: Changes of the remote control setting don´t require a reboot.
A table of all remote control commands can be found in chapter "Remote control from external media controllers", page 26.
R5906747 IOSONO ONE 16/05/2017 19