![background image](http://html1.mh-extra.com/html/barco/imagepro-ii-jr/imagepro-ii-jr_user-manual-addendum_3876304023.webp)
8
ImagePRO-II • User’s Guide
2. Hardware Orientation
ImagePRO-II Front Panel
fã~ÖÉmolJff=cêçåí=m~åÉä
The figure below illustrates the ImagePRO-II
front panel.
Figure 2-1.
ImagePRO-II Front Panel
Following are descriptions of each front panel control feature:
1)
Chassis Handles
Two
Chassis Handles
are provided for ease of installation and transportation.
2) USB
Port
The USB port is provided to support uploading and downloading system
configurations and logos, and upgrading ImagePRO-II firmware.
3) Display
Section
The
Display Section
consists of a four-line display screen. Refer to
on page 9 for complete details.
4) Menu Navigation Section
The
Menu
Navigation Section
includes the
ADJUST
knob, and two navigation
buttons:
SEL
and
ESC
. Refer to
on page 9 for
more information.
5) Menu Access Buttons
The
Menu Access Buttons
provide quick access to specific locations in the
menu system. Refer to
on page 10 for complete details.
6) Input
Buttons
The five numbered
Input Buttons
correspond to the five rear-panel input
connectors. Refer to
on page 11 for information about the inputs.
7) LOGO and BLACK Buttons
The
LOGO
button enables you to capture a stored still image, and transition to
and from the logo. Refer to the
section on page 11 for more
information.
The
BLACK
button transitions the display image to and from black. Refer to
on page 11 for details.
1
3
5
2
8
1
6
4
7
1)
4)
7)
2
USB Port
5)
Menu Access Buttons
8)
3)
6)