R5915190 /00
IEX
77
IEX SE
R
IES
5.3 Daily Maintenance
1
）
Check whether ambient temperature and humidity meet the operating conditions
for the LED display on a daily basis.
2
）
Use the LED display and its auxiliary devices at least twice a week and two hours
each time. Before using the LED display, perform warm-up operations if it has been
idle for 14 days (for details about warm-up operations, see Section 5.4).
3
）
It is recommended that you should use a soft antistatic brush to clear dust on the
screen surface monthly in order to achieve an optimum displaying effect.
4
）
Check the parts in the distribution box quarterly. Check whether the power
cable
s
and signal cables for the LED display are connected securely and safely, and
whether the display is grounded reliably.
5
）
Check whether the steel structure is secure on a yearly basis.
6
）
5.4 Warm-up Operation
If the LED display has been idle for 14 days, perform warm-up operations before using
the LED display.
Set the prestored picture as follows when you initially start the LED display. This setting
is for warm-up operation only. You do not need to set the prestored picture if the LED
display is used frequently.
5.4.1 Setting the Prestored Picture
- NovaLCT
For details about how to set the prestored picture, refer to Section 3.6. Select a black
background picture. Set
Boot Screen
to 60 seconds. Set both
Cable Disconnect
and
No DVI Signal
to
Prestored Picture
. Then click
Save to Hardware
. See Figure 5-
1.
Содержание IEX Series
