R5915190 /00
IEX
39
IEX SE
R
IES
Red
：
Adjust the red brightness value of calibration coefficients.
Green
：
Adjust the green brightness value of calibration coefficients.
Blue
：
Adjust the blue brightness value of calibration coefficients.
6) Save Coefficients: Click
Save
to save the correction coefficients to the hardware.
The saved coefficients are retentive even after a power failure. Then click
Finish
.
Figure 3-19 Saving Correction Coefficients
3.3.4.2 Setting Coefficients for a New Module
1
）
Select Position of the New Module: Select
Topology or List
. Then select the
position of the receiving card where the new module is located. Double click the
selected position:
Содержание IEX Series
