Barco High Bright MDSC-2326 DDIH, Руководство пользователя

Страница: 55 / 72

6. Important information
Ventilation
Do not cover or block any ventilation openings in the cover of the set. When installing the device in a
cupboard or another enclosed location, heed the necessary space between the set and the sides of the
cupboard.
Installation
• Place the equipment on a fl at, solid and stable surface that can support the weight of at least 3 unis.
If you use an unstable cart or stand, the equipment may fall, causing serious injury to a child or adult,
and serious damage to the equipment.
• Do not allow to climb or rest on the equipment.
• When adjusting the angle of the equipment, move it slowly so as to prevent the equipment from moving
from or slipping off its stand or arm.
• When the equipment is attached to an arm, do not use the equipment as a handle or grip in order to
move the equipment. Please refer to the instruction manual of the arm for instructions on how to move
the arm with the equipment.
• Provide full attention to safety during installation, periodic maintenance and examination of this equip-
ment.
• Suf fi cient expertise is required for installing this equipment, especially to determine the strength of the
VESA arm for withstanding the display’s weight. Pay adequate attention to safety during the installa-
tion and usage.
• Barco is not liable for any damage or injury caused by mishandling or improper installation.
Malfunctions
Disconnect the equipment’s power cord from the AC inlet and refer servicing to quali
fi ed service techni-
cians under the following conditions:
• If the power cord or plug is damaged or frayed.
• If liquid has been spilled into the equipment.
• If the equipment has been exposed to rain or water.
• If the equipment does not operate normally when the operating instructions are followed. Adjust only
those controls that are covered by the operating instructions since improper adjustment of other con-
trols may result in damage and will often require extensive work by a quali
fi ed technician to restore
the product to normal operation.
• If the equipment has been dropped or the cabinet has been damaged.
• If the product exhibits a distinct change in performance, indicating a need for service.
General warnings
• All devices and complete setup must be tested and validated before taking into operation.
• At end user application level it is necessary to foresee a backup unit in case the video falls away.
Technical data
• The monitor is intended for indoor use
• The monitor has been designed to be used in landscape position with a tilt of -10° (backward) and
+10° (forward)
• Power consumption: 24VDC 4A (for DDIH version), 24VDC 5A (for MNAH version)
• Operating Temperature: 10-35°C for performance / 0-40°C for safety
• Operating Humidity: 10%-90% RH
• Operating Altitude: 3000m max.
• Storage: -20 ÷ +60°C; 10 ÷ 90%RH
• IP Protection: IP21 (IP45 front side only), maximum tilt ±10 degree
• Class I Equipment, according to the type of protection against electric shock
• The monitor is not intended to be sterilized
K5902135 (451920612562) MDSC-2326 01/12/2017 53