Barco High Bright MDSC-2326 DDIH, Руководство пользователя, Страница: 60 / 72

6. Important information
Emissions test Compliance Electromagnetic environment –
Guidance
RF emissions
CISPR 11
Group 1 The MDSC-2326 uses RF energy
only for its internal function.
Therefore, its RF emissions are
very low and are not likely to
cause any interference in nearby
electronic equipment.
RF emissions
CISPR 11
Class B
Harmonic emissions
IEC 61000-3-2
Not applicable: power
consumption less than 75W
Voltage fl uctuations/ fl icker
emissions
IEC 61000-3-3
Complies
The MDSC-2326 DDIH version
is suitable for use in all
establishments, including
domestic establishments and
those directly connected to the
public low-voltage power supply
network that supplies buildings
used for domestic purposes.
RF emissions
CISPR 11
Class A
Harmonic emissions
IEC 61000-3-2
Not applicable: power
consumption less than 75W
Voltage fl uctuations/ fl icker
emissions
IEC 61000-3-3
Complies
The MDSC-2326 MNAH
version is suitable for use in
all establishments, including
domestic establishments and
those directly connected to the
public low-voltage power supply
network that supplies buildings
used for domestic purposes.
This MDSC-2326 complies with appropriate medical EMC standards on emissions to, and interference
from surrounding equipment. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interfer-
ence that may cause undesired operation.
Interference can be determined by turning the equipment off and on.
If this equipment does cause harmful interference to, or suffer from harmful interference of, surrounding
equipment, the user is encouraged to try to correct the interference by one or more of the following mea-
sures:
• Reorient or relocate the receiving antenna or equipment.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced technician for help.
Electromagnetic immunity
The MDSC-2326 is intended for use in the electromagnetic environment (IEC 60601-1-2 4
th
edition) spec-
i fi ed below. The customer or the user of the MDSC-2326 should assure that it is used in such an environ-
ment.
Immunity test
IEC 60601-1-2 4 th
edition (2014)
Test levels
Compliance level
Electromagnetic
environment –
guidance
Electrostatic discharge
(ESD)
IEC 61000-4-2
± 8kV contact
± 15kV air
± 8kV contact
± 15kV air
Floors should be wood,
concrete or ceramic tile.
If
fl oors are covered with
synthetic material, the
relative humidity should
be at least 30%
Electrical fast
transient/burst
IEC 61000-4-4
± 2kV for power supply
lines
± 1kV for input/ output
lines
± 2kV for power supply
lines
± 1kV for input/ output
lines
Mains power quality
should be that of a typical
commercial or hospital
environment
58 K5902135 (451920612562) MDSC-2326 01/12/2017