Barco HDF W series, Инструкция по использованию и установке

Страница: 62 / 319

5. Getting started
The outline of the selected window gets a colored rectangle to indicate the selection. For the main window, the color is blue. For the
picture in picture window, the color is orange.
Once the desired window is activated (main window or picture in picture window) all keys on the remote control or local keypad can
now control that selected window.
To select the source for the picture in picture window, press Window button until PiP window is activated and then select the desired
source with the digit keys.
To select the source for the main window, press Window button until the main window is activated and then select the desired source
with the digit keys.
5.10 Alignment of a table mount HDF series projector
How to align a table mount HDF series projector ?
Place the projector in the desired location. Take into account the zoom range of the used lens and the size of the screen.
Project one of the internal hatch patterns on the screen.
Turn the adjustable feet in or out until the projected hatch pattern is perfectly rectangle shaped and leveled.
Image 5-9
When this is achieved, the projector is set horizontal and vertical at right angles to the screen.
SCRE
EN
SCR
EEN
Image 5-10
5.11 Alignment of a ceiling mount HDF series projector
Necessary tools
17 mm open ended spanner.
How to align
Install the projector in the desired location. Take into account the zoom range of the used lens and the size of the screen.
Project one of the internal hatch patterns on the screen.
Release the lock nut (ref B image 5-11) of the rigging clamps.
Adjust the height of the rigging clamps with respect to the projector, until the projected hatch pattern is perfectly rectangle shaped
and leveled.
B
B
Image 5-11
58 R5905158 HDF SERIES 16/06/2015