Barco Galaxy WARP 10 HB, Руководство пользователя

Страница: 96 / 155

6. Random Access
6.5.7.6 Shift
What can be done with the Shift adjustment ?
With Shift adjustment it is possible to shift the whole image.
How to Start up Shift adjustment ?
1. Push the cursor key ↑ or ↓ to highlight
Shift
in the
Edit
menu. (menu 6-89)
2. Press
ENTER
to select.
The
Geometry Distortion
menu will be displayed. (menu 6-90)
GUIDED GEOMETRY MAP
COARSE
LINEARITY
FINE
SHIFT
TRANSPORT DELAY
BLANKING/SOFT EDGE
RESET
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 6-89
GEOMETRY DISTORTION
shift
pixels x = 0
y = 0
subpixels x = 0
y = 0
Menu 6-90
How to use the Shift adjustment ?
1. Push the cursor key ↑ or ↓ to select
Pixel x = 0
in the
Geometry Distortion
menu. (menu 6-91)
2. Push the cursor key ← or → to shift the whole image in a horizontal way.
3. Push the cursor key ↑ or ↓ to
Pixel y = 0
in the
Geometry Distortion
menu. (menu 6-92)
4. Push the cursor key ← or → to shift the whole image in a vertical way.
5. Use the subpixel selections to fine shift the whole image.
6. Press
EXIT
to return to the
Guided Geometry Map
menu.
GEOMETRY DISTORTION
shift
pixels x = 0
y = 0
subpixels x = 0
y = 0
Menu 6-91
GEOMETRY DISTORTION
shift
pixels x = 0
y = 0
subpixels x = 0
y = 0
Menu 6-92
6.5.7.7 Transport Delay
What can be done with the Transport Delay
The first image data the projector receives from the Image Generator is the start of the first active line. However when a top side
bow pre-distortion is used, the first image data the projector needs is the image information that is halfway that first active line, to
gather all this information before projecting it on the screen, an adjustable Transport Delay is applied on the received image data.
92 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004