Barco FLX-24, Руководство по установке, Страница: 50 / 76

4. Installation procedures
4.3 Mounting the FLX-24 pixel in its socket
Necessary tools
No tools.
How to mount the FLX-24 pixel in its socket?
1. Check if the socket is provided with an O-ring (red rubber ring).
Note: “Inter fl on fl uor grease 2” is applied to the O-ring at factory for an optimal sealing without risk for “stress cracking”. Only
these types of grease are allowed which do not result in “stress cracking”.
2. Approach the socket with the FLX-24 pixel. Make sure that the three positioning pins (reference 3) of the FLX-24 pixel are aligned
with mounting holes (reference 1) on the socket.
Tip: One side of the pixel and the socket is marked with “stripes” (reference 2) and the other side with “dots” (reference 4).
These markings can be used for a quick alignment of the pixel on in the socket.
3
4
2
1
Image 4-2
3. Press the FLX-24 pixel in its socket.
To remove the pixel, just pull it straight out of its socket. Or, place the blade of a screw driver in the spare
opening at the bottom of the FLX-24 pixel and wriggle it out of its socket.
C
AUTION
:
Prevent at all times that dust or dirt sticks to the O-ring of the FLX-24 pixel socket. In case the
O-ring is damaged or contaminated with dust and/or dirt the IP66 rating can no longer be guaranteed. Note
that Te
fl on spray is applied to the O-ring to ensure a good sealing without risk of degeneration of the O-ring.
Do not let an FLX-24 pixel socket unused. Always install an FLX-24 pixel upon each socket in the pixel string.
Keep the FLX-24 pixel upon the socket for storing.
46 R59770420 FLX-24 21/12/2009