Barco FLX-24 Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 76

Barco FLX-24 Скачать руководство пользователя страница 33

3. Components of an FLX display system

RUNNING BACKUP SOFTWARE
LOAD RUN SOFTWARE

This message appears in case the FLX-NNI Controller unit runs
with backup software. This means that the main software is
corrupt and should be updated. Updating the software of the
FLX-NNI Controller unit has to be done with the Director toolset.
See user guide of the Director toolset for detailed instructions.

Note that the functionality of an FLX-NNI Controller unit which
runs with backup software is limited. The content of the

fi

rst pixel

is copied on all other pixels.

SYNC LOST !
Please check cables

This message appears in case the FLX-NNI Controller unit does
not

fi

nd a sync signal on the data input socket (IN). Check all data

cables in the upstream of the system.

After a few seconds this message will be replaced by the root
menu. In the lower left corner of the root menu the message ’!
NO SYNC !’ will remain.

HUB update init

This message appears when initializing the software update
process for all FLX-HUB units connected with the FLX-NNI
Controller unit.

HUB update retry

This message appears when the

fi

rst attempt to update the

software for all FLX-HUB units connected with the FLX-NNI
Controller unit failed.

HUB update ...%

This message appears during the software update process of all
FLX-HUB units connected with the FLX-NNI Controller unit.

HUB update transfer

This message appears during the transfer in the update process
of all FLX-HUB units connected with the FLX-NNI Controller unit.

HUB update checksum

This message appears during the checksum in the update process
of all FLX-HUB units connected with the FLX-NNI Controller unit.

HUB update error

This message appears in case an error occurred during the
update process of all FLX-HUB units connected with the FLX-NNI
Controller unit.

HUB update done

This message appears in case the update process of all FLX-HUB
units connected with the FLX-NNI Controller unit was successful.

R59770420 FLX-24 21/12/2009

29

«
...
31
32
33
34
35
...
»

Содержание FLX-24













































































Отзывы:

Нет отзывов