Barco F90 series, Руководство по обслуживанию

Страница: 117 / 141

22. TI Loop
2. 2. Remove the clip holding lens in place.
3. 3. Lift out the lens.
Note: The Blue Loop lense 4 is NOT directional.
Image 22-11
22.2.8 Diffusor blue loop
1. 1. Use the wedges to gently pull out the diffusor.
Image 22-12
22.2.9 390 RGBY Converging Lenses
Each TI Loop is equipped with 2 Converging Lenses, one at the entrance and one at the exit of the loop.
• Always use fi nger cots or gloves when handling lens elements
• NOTE direction of lens when reinstalled. The fl at surface should be facing outwards towards Laser cluster, curved/concave
side in.
• NOTE direction of clip when mounting. The four (4) center fl aps should point inwards.
22.2.9.1 Converging Lens (Entrance)
1. Place a cloth or similar on the entrance fl oor to protect the lens in case it falls when screws/clips is released.
2. Remove 4 screws (Tx8 M2.5x6) releasing the clip and lens.
3. Assemble in reverse order.
Image 22-13
Image 22-14
Image 22-15
723–0016 F90 01/12/2017 115