![background image](http://html1.mh-extra.com/html/barco/f80-q7/f80-q7_user-manual_4121408031.webp)
4. Getting Started
Image 4-2
4.5
Power off projector
How to Switch off the projector
1. Use the
standby button
, or the
Power On
button on the remote control, to switch off the projector.
The projector will switch to
READY
mode
fi
rst in order to run through a cool down phase (see "Power mode transitions", page
25).
2. If
ECO
Standby mode is enabled in the service menu (refer to the section "GUI - system settings/Standby ECO", in User Guide)
the projector will automatically go to
ECO
standby mode after a time-out (default 15 minutes).
Some actions like apply a grey test pattern are done during the two minutes of the cool down phase in order
to minimize the potential effect of burn-in and increase the projector lifetime.
C
AUTION
:
Never switch off the projector by means of unplugging mains cord or by cut down of mains power.
Barco advises to keep the projector always powered and use the ECO mode for low power consumption.
How to unplug the projector
1. Follow the procedure above to Switch Off the projector.
2. Wait at least 2 minutes prior to unplug the projector by removing the power cord from the AC outlet.
C
AUTION
:
It is very important to wait few minutes before unplug the power cord. If the cool down phase is
not adhered, projector lifetime could be degraded.
4.6
Operation in 24/7 Mode
General
When the projector is destined to be operated continuously 24 hours a day / 7 days a week, some rules must be followed to minimize
the potential effect of burn-in and increase the projector lifetime.
R5906852 F80 SERIES 21/09/2017
27
Содержание F80-Q7
