Barco F50, Руководство пользователя

Страница: 49 / 66

english
49
6 Functionality
The various functions of the projector are described in detail in the following chapters.
6.1 Powering On and Off
6.1.1 Manual power control
Switch the projector between On and Standby using the POWER switch on the keypad or
the wireless remote control.
The keypad STATUS indicator is blue when the projector is up and running, flashing yellow
when cooling down and yellow when in standby. No status light indicates that the power has
been switched off completely in the installation.
6.1.2 DPMS - power down
This is a power down mode which needs to be activated in the SETTINGS menu.
When activated it powers down after a specified period of time after a source has been
removed. The time out setting can be specified in the
DPMS TIMEOUT function in the same
menu, using the arrow keys.
6.2 Image alignment
Test images are built into the system for easier alignment of the projector
To access the test images, go to the menu entry INSTALLATION > TEST IMAGE . Run
through the various test images using the arrow keys. When a test image matching the as-
pect ratio of your screen has been found, you can match the screen using the zoom, focus,
lens shift and aligning the projector physically.
6.2.1 Image orientation
The projector supports the following installation orientations (in relation to the screen):
• Desktop front (default)
• Ceiling front
• Desktop rear
• Ceiling rear
To set the image orientation go to menu entry
INSTALLATION > IMAGE ORIENTATION.