![background image](http://html1.mh-extra.com/html/barco/f400/f400_user-manual_4464058044.webp)
R5915525 /00
Fx400 Series
44
WHITE during the transition from
ON
to
READY
. Once the projector is in
READY
, the
Power on/off
button will
be lit WHITE.
A JSON command (power off ) could also be send to make the projector turn in to
READY
mode.
4.5.5 Going from READY to Standby ECO
Description
If Standby ECO mode is enabled in the service menu (refer to the section "GUI - system settings/Standby
ECO", in User Guide) the projector will automatically go to Standby ECO mode after a time-out (default 15
minutes). All electronics (including fans, pumps,...) go down except for a very small wake up controller. The
Power on/off
button will FLASH WHITE every second.
And finally, a JSON / API command (gotoeco) could also be send to make the projector turn in to
ECO
mode.
4.5.6 Going from ECO to ON
Description
Press the
Power on/off
button on the projector or the
Power On
button on the remote control. The projector
goes from
ECO
directly to
ON
. The projector will go through the same booting phase as on power plugging,
then do the transition from
READY
to
ON
. Of course startup-time will be longer then from
READY
to
ON
.
4.5.7 Wake on LAN (WOL)
Description
Wake-on-LAN (WOL), the standard ethernet network command, can be used to awakened or to turn on the
projector by network message.
Used alone, the WOL command allows to switch in
READY
mode. A JSON command must be performed in
addition to make the projector turn in to
ON
mode:
1. Send WOL.
2. Wait for connection to façade/prospector (the unit does provide feedback when it’s ready).
3. Wait for ready state.
4. Sleep 5 seconds.
5. Send JSON “power on” command (to switch in
ON
mode).
4.6 Status overview
Description
Once the projector is started, go to
Status
menu to get an overview of parameters such as :
•
Chosen source
•
Current resolution and refresh rate
•
Device serial number and article number
•
Current firmware version and model name
•
Current illumination (in percentage)
•
Lamp runtime in hours
•
Chosen communication method and IP address (if connected)
•
Warp status
•
Environmental temperature
Содержание F400
