Barco F400, Руководство пользователя

Страница: 43 / 220

43 R5915525 /00 Fx400 Series
Standby ECO
Ready
On
Standby
API
ON
ECO
API
ON
ECO
API
ON
OFF
API
ON
ON
API
ON
OFF
API
ON
ON
API
ON
ON
API
ON
ON
Image 4–5
-
Projector mains powered
-
Auto transition after x minutes if ECO mode enables
-
Press power On/Off button, remote On/Off button
-
Wake on LAN (WOL)
-
API
ON
OFF
JSON command (Power on, Power off, Go to Eco)
4.5.2 Power on projector
If not already connected, connect the female side of the power cord with the power input socket of
the projector. For more details see section dedicated to the power cord installation.
The background image of the startup screen and info screens can be changed with Projector
Toolset with an installed F400 plug-in.
Description
Plug the 3-prong plug of power cord into a grounded AC outlet. The projector will go to READY mode. During
this stage the system boots and performs the internal check of the boards. The Power On/Off button will
BLINK white until READY mode is achieved. Once in READY mode, the Power On/Off button will be lit
WHITE.
4.5.3 Going from READY to ON
Description
Press the Power On/Off button (short press) on the projector, or the Power On button on the remote control.
The projector will power ON . The Power On/Off button will BLINK BLUE during the transition from READY to
ON . Once the projector is on, the Power On/Off button will be lit BLUE.
A JSON / API command (power on) could also be sent to make the projector turn in to ON mode.
4.5.4 Going from ON to READY
Description
Press and hold the Power on/off button on the projector for 3 seconds, or press the Power Off button on the
remote control. The projector will power down through a cool down phase. The Power on/off button will BLINK
Getting started