Barco F400, Руководство пользователя

Страница: 42 / 220

R5915525 /00 Fx400 Series 42
LCD panel
The LCD panel has two main functions, and use the arrow keys to navigate in the LCD display:
1. Showing the menus, the adjustment information and also a mirror of the OSD (On Screen Display)
described in User Interface when this is enabled.
2. Information regarding the status of the projector showing this data:
• Projector status
• Network address
• Active source
• Current firmware version
• Operation Data
• Active functions (Enabled Functions).
Toggle between the two indications by using the Menu button on the keypad, or on the remote control.
The LCD Display will fade out 30 seconds after the last key operation.
4.4 Power modes
General
The table below details the F400 power modes.
Mode
Description
ON (normal) Projector is booted up and the light source is on
READY Projector is booted up but the light source is off
Standby Light source is switched off.
Standby ECO Light source is switched off and projector electronics
are powered down
Energy consumption is significantly lowers in ECO (Standby) mode: only <0.5W if network is not
plugged in and 2W with network (Wake-on-LAN).
In standby ECO mode, remote power up (Wake-on-LAN) and local power up (button) are supported.
4.5 Power mode transitions
4.5.1 General
Transition Diagram
This diagram shows all modes available on the projector (unplug, ON, READY, ECO), and the actions
necessary to change mode.
Getting started