Barco DP2K Series Скачать руководство пользователя страница 54

Страница: 54 / 287

3. Configuration

The selected SCREEN

le is activated. The name of the

le is indicated below the

Activate a SCREEN

button.

Image 3-20
Activate a SCREEN

3.6.2

Resizing the image

AUTION

Set lens anamorphic factor to 1.0 before starting resizing.

Overview

•

What is Resizing?

•

Resizing with the arrow keys

•

Resizing with direct user input

•

Letterbox function

Displaying test patterns to check resizing: make sure the anamorphic lens factor is set
correctly.

3.6.2.1 What is Resizing?

nition

With the resizing tool it is possible to adapt the projected image on the screen size (de

ning the area

available for image display). So, look always to the screen when resizing the image.

The projector will always attempt to keep the image centered within this de

ned area, and the correct

aspect ratio of the image will always be preserved.

The key function that determines how the image will be displayed is the Letterbox function. For a more
detailed explanation, see "Letterbox function", page 54.

R59770488 COMMUNICATOR TOUCH PANEL 06/06/2012

Содержание DP2K Series
































































































































































































































































































Результаты поиска

Содержание DP2K Series

Отзывы:

Barco DP2K Series, Руководство пользователя, Страница: 54 / 287

Результаты поиска

Содержание DP2K Series

Отзывы: