Barco DP2K Series Скачать руководство пользователя страница 38

Страница: 38 / 287

3. Configuration

2. Browse to the desired

le and tip on a

le to select (3). Then tip

Save

(4).

The selected macro is associated with the button (5). The name of the macro

le is added next to

button.

Image 3-1
Macro association

3.2.3

Removing an association

How to remove

1. Go to the button where the association must be removed.

2. Tip on the Remove icon. (image 3-2)

The associated macro is removed from the button.

Image 3-2
Delete a macro association

3.2.4

Edit a macro

How to edit

1. Go to the button for which the macro has to be edited.

2. Tip on the Edit macro icon (1). (image 3-3)

The Macro editor starts and shows the content of the associated macro (2).

For more explanation about the Macro editor, see "Save to macro", page 37.

R59770488 COMMUNICATOR TOUCH PANEL 06/06/2012

Содержание DP2K Series
































































































































































































































































































Результаты поиска

Содержание DP2K Series

Отзывы:

Barco DP2K Series, Руководство пользователя, Страница: 38 / 287

Результаты поиска

Содержание DP2K Series

Отзывы: