Barco DP2K-19B, Руководство по установке

Страница: 23 / 125

3. Physical installation
3. PHYSICAL INSTALLATION
About this chapter
This chapter describes how the mechanical and electrical set up of the projector has to be done.
Overview
• Positioning the B-series projector at port window
• Installation of the exhaust system
• Access to the power connection
• Connecting the DPxK-19B/23B/P with the power net
• Power loop through to the projector electronics
• Connecting a UPS to the projector electronics
3.1 Positioning the B-series projector at port window
W
ARNING
:
The installation of the B-series projector requires at least 4 persons.
General guide lines
• Use a solid pedestal to put the B-series projector on. Ensure that the pedestal can handle the weight of the projector and that
all feet of the projector are captured.
• The pedestal should be placed in front of the port window wall in a manner that the projector front cover is at a minimum distance
of 20 centimeters from the port window.
20 cm
Image 3-1
Positioning at port window
Barco offers a pedestal for the B-series projector. This universal pedestal allows a solid and easy setup of
the projector. The universal pedestal has a separate compartment to install the UPS unit (if available) for the
B-series projector. Futhermore, the universal pedestal contains a standard 19” rack to build in the projector
peripherals like alternative content switchers (e.g. ACS-2048).
Necessary tools
• 14 mm wrench
• 17 mm wrench
Projector centering
1. If the projector is standalone in front of the port window, center the projector with the theatre screen (see ref A image 3-2).
R5905067 DPXK-19B/23B/P 17/09/2012 17